What is the Janka Wood Scale?

The Janka Hardness Scale determines the hardness of a particular type of wood over another. The scale was invented in 1906 by Gabriel Janka, an Austrian wood researcher, and standardized in 1927 by the American Society for Testing and Materials (ASTM).

Depending on the room where the flooring will be installed, a certain level of hardness may make it a more desirable choice. Generally speaking, the higher the number on the scale, the harder and more scratch resistant a wood is. The harder a wood is, the more difficult it becomes to saw or run through a mill. Surprisingly enough, though, this does not impact price for flooring. Flooring prices are dictated by how readily available the species of wood is, rather than how hard it is.

Where The Wood Hardness Scale Comes From

The scale was developed as a means for displaying the results of the Janka hardness test. The test uses a 2″ x 2″ x 6″ piece of wood and a 0.444″ steel ball to determine how hard the wood is. The test figures out how many pounds per square inch, or PSI, of force is needed to push the steel ball half way into the wood plank.

Janka Scale Test Variables

When the Janka test is conducted on a specimen of wood, the results may vary slightly, depending on the grain of wood used for the test. For example, if the grain is flat, it is considered normal and is presented on the Janka scale. Though vertical wood grains are tested too, those results are not usually shown on the scale. Wood is also tested on the sides or ends, because that provides a different hardness rating, but these ratings are not displayed on the typical hardness scale.

What The Wood Hardness Scale Looks Like

The Janka Hardness Scale starts at zero, with this option being the softest wood choice, making it easy to dent and scratch. Though no wood on the scale has this rating, a rating like this would not make for a good floor. The highest rating on the scale is a 4000, making for an extremely hard wood, also not likely suitable for flooring because it would be so difficult to saw.

How To State The Janka Rating

This is where the Janka rating starts to get confusing for most. Stating the rating is done differently depending on the country. For instance, in the United States the Janka ranting is supplied in pounds force, whereas in Sweden it is stated in kilograms force, and in Australia it is stated in Newtons.

What is A “Good” Janka Rating?

When choosing flooring for a home, having an idea of the Janka scale rating will provide buyers with an indication of how strong the floor is and how much wear and tear it will be able to handle over the years before it requires repair or replacement. Even still, a “good” Janka rating serves only as an indication, because it is not just the hardness that plays a role in the appearance and durability of a floor over time. It is also the traffic, the maintenance and prevention that dictates how well a floor will look years after it is installed.

What is A “Bad” Janka Hardness Rating?

Balsa wood, a wood commonly used in crafts, ranks at 100 on the scale, making it the softest wood on many scales. While this type of wood would not be used for flooring, it is easy to see why a rating of 1000 or higher is the standard for flooring options. No rating is really “bad” when it comes to flooring options, for the very reasons we’ve already mentioned.

A Closer Look At Oak

Oak is the most popular wood flooring choice, but where does it rank on the scale? White oak has a rating of 1360 and red oak has a rating of 1260. Other flooring types rate harder and softer than this, so what makes oak so special? Most likely it is the abundance of oak available for saw mills leading to its mass production for flooring purposes that makes it an affordable option. The more affordable something is to the general public, the more widely used it is likely to be. This isn’t to say that oak isn’t a strong wood that will hold up to wear and tear for some time, but going strictly by the Janka rating, there are other choices out there for harder woods.

Hardwood vs. Softwood

Let’s take a closer look at hardwood and softwood in a home to demonstrate how care and maintenance play a considerable role in the appearance of floors years down the road. Consider two homes by the beach, where sand will provide the means for scratching on the floor surface.

Home A uses a soft wood, such as American Cherry (950 on the Janka Scale). The owners take extreme care in cleaning the floor and keeping the sand from the inside of the home. Ten years after the installation, the flooring looks as new as it did the day it was installed. The residents of the home include children and pets, all of whom stay active. The Janka Hardness Scale may lead people to believe this would be a bad flooring choice, when in all actuality, it may be the perfect one!

Home B uses a fairly hard wood, such as Brazilian Cherry (2820 on the Janka Scale). The owners are not known for cleaning up after themselves and maintain a highly active lifestyle. Six years after the installation, the floor looks terrible and may need replacement. The Janka Hardness Scale may lead people to believe this is a better choice of flooring, simply because it is harder than its American Cherry counterpart, when that’s not necessarily the case.

Can Softer Mean Stronger?

Don’t confuse the hardness of the flooring with its strength. The hardness serves only as an indicator of how well the floor will withstand wear and tear day to day, rather than how strong the wood is. Do not relate the hardness or softness to the way the wood feels, as this has no bearing on that aspect of the flooring. This scale also has nothing to do with how soft a floor is in terms of comfort.

What Does All Of This Mean?

Choose a hardwood floor based on its look and price before anything else. The bottom line is that no matter what, wood will need to be taken care of correctly to withstand the wear of time. If it isn’t taken care of, it doesn’t matter how hard or soft it is. If a decision cannot be reached, try using the Janka rating to gauge the hardness of the wood, solely as an indicator of how well the wood will be able to stand up to furniture, pets, children, and everyday life. Softer woods don’t always mean earlier replacement and repairs, so going with look and price first is always the best bet.

Retrieved from www.builddirect.com written by Unknown